Angelo Po 1N1FAE Bedienhandbuch Seite 168

ENGLISH
INSTRUCTIONS AND WARNING FOR REPLACING PARTS
NOTE: Read the following section of
the "user instruction manual" carefully be-
fore replacing any part:
– Hazards and safety provisions during instal-
lation and commissioning, adjustments and
part replacement.
WARNING: Before carrying out any
replacement procedure, activate all the
safety devices provided and decide whether
staff at work and those in the vicinity should
be informed.
In particular, turn off the gas supply tap and
prevent access to all devices which might
cause unexpected health and safety hazards
if turned on.
REPLACING THE TOP BURNER NOZZLE (Ø 80 - 4 KW)
To carry out this operation, proceed as follows.
Turn off the gas supply
1)
tap.
Remove the grid (A).
2)
Extract the burner (B).
3)
Unscrew the nozzle (C)
4)
and replace it with the
one suitable for the type
of gas in use (see table at
back of manual).
Replace the burner and
5)
the grid.
16
REPLACING PARTS
A
If work parts have to be replaced, use origi-
nal spare parts only.
The manufacturer declines all responsibly
for injury or damage to components due
to the use of non original parts, or extra-
ordinary work on the appliance which may
modify the safety requirements without the
manufacturer's authorisation.
When ordering components, follow the in-
structions provided in the parts catalogue.
B
REPLACING PARTS
8
C
3320050_inst_GB_rev.2