Installing A Front Wheel With Rose Thru Axle - ROSE Blend Bedienungsanleitung

3.4 Installing a front wheel with ROSE thru axle

DANGER
Risk of accident due to incorrectly assembled wheels!
Improperly fitted front or rear wheel axles might suddenly loosen during the ride, which may loosen or block the wheel!
• Thru axles must always be tightened to the prescribed torque.
• Check whether the thru axles are properly attached before every ride.
• If in doubt, please consult the ROSE service team or a qualified bicycle mechanic.
A bike work stand can help you assemble the front wheel. When using a work stand make sure to install the
seat post first so that you can clamp the bike into the assembly stand at the seat post.
The lever of the ROSE thru axle can be removed and used for the front or rear wheel. To do this, press the two unlocking
buttons on the side.
41