Bike Assembly; Required Tools - ROSE Blend Bedienungsanleitung

3.

Bike assembly

This chapter aims at helping you remove your bike from the ROSE bike box and assemble it.
Depending on the bike model, different components may have been removed or repositioned for shipping. In addition, you
have to install the pedals and check whether your bike is in a roadworthy condition.
Check the bike and its parts for transport damage after unpacking. If there is damage of any kind, please contact ROSE
Service.
DANGER
Improperly assembled components can cause serious crashes!
Any improperly assembled components could loosen during the ride!
• Always follow the assembly instructions included in this manual.
• If in doubt, please consult the ROSE service team or a qualified bicycle mechanic.
In addition to this manual, you will find a video on
how to assemble your bike at rosebikes.com.

3.1 Required tools

Depending on bike model and equipment, you will need the following tools for assembly:
• 4 mm, 5 mm, 6 mm, 8 mm hex wrench
• Torque wrench with a 4 mm, 5 mm, 6 mm and 8 mm hex drive
• 15 mm open-ended spanner
38