Instant Pot PRO CRISP Bedienungsanleitung Seite 7

IMPORTANT SAFEGUARDS
only replace the sealing ring with an authorised Instant Pot sealing ring.
25 Avoid contact with moving parts as this may result in injury.
26 DO NOT attempt to repair, replace or modify components of the
appliance as this may cause electric shock, fire or injury and will void
the warranty.
27 DO NOT tamper with any of the safety mechanisms as this may result
in injury or property damage.
28 The multicooker base and air fryer lid contain electrical components.
To avoid electric shock:
• DO NOT put liquid of any kind into the multicooker base without the
inner pot in place;
• DO NOT immerse the multicooker base, the air fryer lid or the power
lead or plug in water or other liquid;
• DO NOT rinse the multicooker base or air fryer lid under a tap.
29 DO NOT use the appliance in electrical systems other than
220-240V ~ 50-60Hz. Do not use with power converters or adapters.
30 This appliance is NOT to be used by children or by persons with
reduced physical, sensory or mental capabilities. Close supervision
is necessary when any appliance is used near children and these
individuals. Children should not use or play with this appliance.
31 DO NOT leave the appliance unattended while in use. Never
connect this appliance to an external timer switch or separate
remote control system.
32 DO NOT store any materials in the multicooker base or inner pot when
not in use.
33 DO NOT place any combustible materials in the multicooker base or
inner pot, such as paper, cardboard, plastic, polystyrene or wood.
34 DO NOT use the included accessories in a microwave, toaster oven,
convection or conventional oven, or on a ceramic, electric, gas hob
or outdoor grill.
SAVE THESE INSTRUCTIONS.
Read this manual carefully and completely and retain for future reference. Failure
to adhere to safety instructions may result in serious injury or damage.
Pro-Crisp-UK-ENG-GSG-2021-03-23.indd 7 Pro-Crisp-UK-ENG-GSG-2021-03-23.indd 7
WARNING
Instantpot.co.uk | 7
3/23/21 1:42 PM 3/23/21 1:42 PM