Instant Pot PRO CRISP Bedienungsanleitung Seite 23

Pressure control features
Float valve
The float valve lets you know when there is pressure in the multicooker (pressurised) or
not (depressurised). It appears in 2 positions:
Pressurised
The float valve has visibly popped
up above the surface of the lid.
The float valve and silicone cap work together to seal in pressurised steam. These parts
must be installed before use. Do not attempt to operate the Instant Pot without the float
valve properly installed. Do not touch the float valve during use.
DO NOT attempt to remove the lid while the float valve is up and NEVER
attempt to force the lid open. Contents are under extreme pressure. Float
valve must be down before attempting to remove the lid. Failure to follow these
instructions may result in serious personal injury and/or property damage.
QuickCool
™
See QuickCool in the full manual online at instantpot.co.uk for more information.
The lid will be hot during and after cooking. Do not touch the exposed metal with
bare skin to avoid injury.
Pro-Crisp-UK-ENG-GSG-2021-03-23.indd 23 Pro-Crisp-UK-ENG-GSG-2021-03-23.indd 23
Depressurised
The float valve has dropped,
and the top is flush with the lid.
DANGER
CAUTION
Instantpot.co.uk | 23
3/23/21 1:42 PM 3/23/21 1:42 PM