Instant Pot PRO CRISP Bedienungsanleitung Seite 22

Pressure control features
Anti-block shield
The anti-block shield prevents food particles from coming up
through the steam release pipe, which assists with pressure
regulation.
The anti-block shield is integral to product safety and necessary
for pressure cooking, so it must be installed before use.
Sealing ring
When the pressure cooking lid is closed, the sealing ring
creates an airtight seal between the lid and the inner pot.
The sealing ring must be installed before use.
Only one sealing ring should be installed in the lid
at a time.
Instant Tip: Silicone is porous, so it absorbs strong aromas and certain flavours. Keep
extra sealing rings on hand to limit the transfer of those aromas and flavours between
dishes. Visit our store to start colour-coding your cooking!
Always check for cuts, deformation and correct installation before cooking,
as sealing rings stretch over time with normal use. If you notice stretching,
deformation or damage to your sealing ring, DO NOT use it.
Replace the sealing ring every 12 to 18 months or sooner, and only use
authorised Instant Pot sealing rings.
Failure to follow these instructions may cause food to discharge, which may lead
to personal injury or property damage.
22 | support@instantpot.co.uk | +44 (0) 3331 230051
Pro-Crisp-UK-ENG-GSG-2021-03-23.indd 22 Pro-Crisp-UK-ENG-GSG-2021-03-23.indd 22
CAUTION
3/23/21 1:42 PM 3/23/21 1:42 PM