Abicor Binzel EWR 2 Net MFC-Mode Originalbetriebsanleitung Seite 49

EWR 2 Net MFC Mode
8.6 Submenu 2 Authorization
 4.2 Authorization levels/password on page EN-8
If the password entered is incorrect, the authorization level is set to <User>. In the "User" authorization level,
only reading of the target values is possible; it is not possible to make configurations. The password for the
"Setter" authorization level can be changed by the "Setter/Service" via the software service.
To open the submenus, press the <OK> button.
1
The following submenus are available:
To switch between the submenu items, press the <◄ ►> arrow buttons.
2
To select a submenu, press the <OK> button.
3
Press the <▲▼> and <◄ ►> arrow buttons until the required settings/values
4
are reached.
To save the setting and go to the previously selected submenu item, press
5
the <OK> button.
To return to the main menu, press the <▲> arrow button twice or
6
the <On/Bypass> button twice.
To open the submenu, press the <OK> button.
1
The display for entering the password appears.
To select the required settings/values, press the <◄ ►> and <▲▼> arrow
2
buttons.
To save the setting and go to the previously selected submenu item, press
3
the <OK> button.
Subsequently, <Password wrong> appears if the entry is incorrect, and
a corresponding authorization level appears if the entry is correct.
To return to the main menu, press the <▲> arrow button or the <On/Bypass>
4
button.
8 Operation
EN - 17