Abicor Binzel EWR 2 Net MFC-Mode Originalbetriebsanleitung Seite 39

EWR 2 Net MFC Mode
2.5 Safety instructions for the electrical power supply
► Ensure that the power supply cable is not damaged, for example, by being driven over, crushed or torn.
► Check the power supply cable for damage and wear at regular intervals.
► If it is necessary to replace the power supply cable, only models indicated by the manufacturer may
be used.
► Only a qualified electrician should replace the mains connecting cable and the mains plug.
► Splash-water protection and mechanical stability must be ensured when replacing the mains plug of
the power supply cable.
2.6 Personal protective equipment
► Wear your personal protective equipment (PPE).
► Ensure that others in close proximity are also wearing personal protective equipment.
Personal protective equipment consists of protective clothing, safety goggles, a class P3 respiratory mask,
protective gloves, and safety shoes.
2.7 Emergency information
► In the event of an emergency, immediately disconnect the following supplies:
— Electrical power supply
— Gas supply
► Extinguish burning oil or emulsions using a CO2 or powder fire extinguisher.
3 Scope of delivery
The following components are included in the scope of delivery:
— 1× EWR 2 Net MFC Mode
— 1× calibration report
— 1× operating instructions
— Power supply*
* The following power supply types are available:
— Power supply unit for socket (delivered with various socket adapters)
— 10 m line with open line end (a stable power supply of 24 V DC ± 20% (20 W) is required)
The following components are available as an option:
— Service kit including service software on USB stick, USB jack connector cable and Ethernet cable
— Relay box
► Order the equipment parts and wear parts separately.
► The order data and ID numbers for the equipment parts and wear parts can be found in the current
catalog.
► For more information about points of contact, consultation, and orders, visit www.binzel-abicor.com.
Although the items delivered are carefully checked and packaged, it is not possible to fully exclude the risk
of transport damage.
Goods-in inspection
► Use the delivery note to check that everything has been delivered.
► Check the delivery for damage (visual inspection).
Complaints
► If goods are damaged, contact the final carrier.
► Keep the packaging for possible checks by the carrier.
Returns
► Use the original packaging and packing material for returns.
If you have questions concerning packaging and safety during shipment, contact your supplier, carrier,
or transport company.
3 Scope of delivery
EN - 7