Setting The Sampling Rate For Outgoing Spdif Audio Signals; Showing Information About Spdif Audio Signals - G&D Audio-Transceiver-Fiber Installationsanleitung

Setting the sampling rate for outgoing SPDIF audio signals

NOTE: This setting is only relevant for digital variants. When using the variant
Audio-Transceiver-Fiber-ANALOG
The signal extender supports various sampling rates for outgoing SPDIF audio signals.
NOTE:
The setting 192 kHz
pling rate of 192 kHz or 176.4 kHz for the SPDIF audio signal.
How to select the sampling rate:
1. Use the terminal emulation program to establish a connection.
2. Use the arrow keys
3. Press (repeatedly) to select one of the following settings:
Space
192 kHz: Audio signals are issued with a sampling rate of 192 kHz using the
SPDIF interface.
96 kHz:
Audio signals are issued with a sampling rate of 96 kHz using the
SPDIF interface.
48 kHz: Audio signals are issued with a sampling rate of 48 kHz using the
SPDIF interface.
4. Press to save your settings.
S

Showing information about SPDIF audio signals

NOTE:
This setting is only relevant for digital variants. When using the variant
Audio-Transceiver-Fiber-ANALOG
The menu
Show SPDIF parameters
incoming SPDIF audio signals.
How to show SPDIF information in the terminal emulation program:
1. Use the terminal emulation program to establish a connection.
2. Use the
arrow keys
3. Press to show information about the SPDIF audio signals in the terminal
Enter
emulation program.
, no setting is required here.
is only available when the signal extender detects a sam-
to select the row SPDIF Output
, no setting is required here.
shows information about various parameters of
to select the row
Show SPDIF parameters
.
.
Audio-Transceiver-Fiber · 13
Configuration