Herunterladen Diese Seite drucken

Coltri Compressors SMART MCH-8-11/EM Bedienungs- Und Wartungshandbuch Seite 28

Werbung

ENGLISH
5 - HANDLING AND INSTALLATION
5.1
UNPACKING
The compressor is packed in a cardboard box on a pallet to simplify
handling and transport.
The box containing the compressor must be moved according to the
instructions shown on the box itself.
The machine is supplied with the following as standard:
- 2 Refill hoses 1200 mm;
- 2 Filling connection;
- 1 Active carbon and molecular sieve Maxifilter cartridge vacuum;
- 1 Use and maintenance manual;
- EC declaration of conformity.
5.2
HANDLING
After separating the compressor from its packaging it can be transported to
the designated placement area.
Transfer will require the use of a fork-lift or transpallet (of suitable load-
bearing capacity).
To lift the compressor use the carry handles (a).
If the compressor is to be lifted manually make sure the task is done by two
workers, once again using the carry handles (a).
IMPORTANT: Proceeding with the utmost care when lifting,
transferring and positioning the compressor.
WARNING: Manual lifting of the compressor requires at least
two workers and in any case no individual worker should lift
more than 30 Kg.
28 - 56
a
SMART
DEUTSCH
5 - TRANSPORT UND INSTALLATION
5.1
VERPACKUNG
Der Kompressor wird in einer Kartonkiste auf Europoolpalette geliefert, um
problemlos bewegt und transportiert werden zu können.
Die Kartonkiste mit dem Kompressor gemäß den darauf angeführten
Anweisungen bewegen.
Serienmäßig ist die Maschine ausgestattet mit:
- 2 Füllschläuche, 1200 mm;
- 2 Flaschenanschlüsse;
- 1 Maxifilterpatrone mit Aktivkohle und Molekularsieb, vakuumverpackt;
- 1 Bedienungs- und Wartungshandbuch;
- EG-konformitätserklärung.
5.2
TRANSPORT
Nachdem der Kompressor ausgepackt wurde, kann er zum vorgesehenen
Aufstellungsort gebracht werden.
Dazu muss ein Gabelstapler oder Hubwagen (mit angemessener Tragkraft)
verwendet werden.
Den Kompressor nur an den Hebegriffen (a) heben.
Sollte der Kompressor manuell angehoben werden, sicherstellen,
dass dieser von zwei Bedienern und immer nur an den Hebegriffen (a)
angehoben wird.
HINWEIS: Beim Heben, Bewegen und Aufstellen des
Kompressors ist besondere Vorsicht geboten.
ACHTUNG: Manuell muss der Kompressor von mindestens
2 Personen gleichzeitig gehoben werden, wobei jede Person
nicht mehr als 30 kg heben darf.
a
MU-SMART-0820

Werbung

loading

Diese Anleitung auch für:

Smart mch-13-16/et