G&D VisionXS-F-DP-UHR Installation Und Bedienung Seite 196

Configuration
Information display
Information displays are shown temporarily (5 seconds) in the upper left corner.
The information display can also be shown permanently or it can be disabled.
How to change the setting of the information display:
1. Press Ctrl+Num
2. Press to open the
F10
3. Under Display
off  information display is turned off
temp  information display is shown temporarily for 5 seconds (default)
permt  permanent information display
4. Press to save your settings.
F2
Adjusting the transparency of the OSD
In the default settings of the KVM switch, the OSD covers parts of the screen con-
tent. However, the parts of the screen contents covered by the OSD are still visible.
You can adjust the transparency level or turn the transparency off.
How to adjust the transparency of the OSD:
1. Press Ctrl+Num
2. Press F10 to open the
3. Under
OSD transparency
high  high transparency of the screen content
average  average transparency of the screen content (default)
 low transparency of the screen content
low
 screen content is covered
off
4. Press F2 to save your settings.
84 · G&D VisionXS-F-DP-UHR
(default) to open the OSD.
Personal Profile
press F8 to select between the following options:
(default) to open the OSD.
Personal Profile
press to select one of the following options:
F8
menu.
menu.