G&D VisionXS-F-DP-UHR Installation Und Bedienung Seite 183

Reducing the colour depth of the image data to be transmitted
In the default settings, the KVM extender transmits the image information with a
maximum colour depth of 24 bit to the console module.
Using a high resolution and displaying moving images can result in the console
module "skipping" several images.
In such cases, reduce the colour depth of the image data to 18 bits. This way the
data volume to be transmitted can be reduced.
NOTE: Depending on the image contents, reducing the colour depth may result in
slight colour grades.
How to change the colour depth of the image data to be transmitted:
1. Press Ctrl+Num
2. Select the row
3. Under
Color depth
24 Bit:  transmits the image data with a maximum colour depth
of 24 bits (default)
 reduces the colour depth of image data to 18 bits
18 Bit:
4. Press to save your settings.
F2
(default) to open the OSD.
and press
Target setup Enter
press to select on of the following options:
F8
.
G&D VisionXS-F-DP-UHR · 71
Configuration