G&D VisionXS-F-DP-UHR Installation Und Bedienung Seite 190

Configuration
Reinitialising USB input devices
Once you connect a USB keyboard or mouse to the KVM extender, the input device
is initialised and can be used without restrictions.
The USB connection of some USB input devices needs to be reinitialised after a cer-
tain time. Activate the automatic reinitialisation of the USB input devices if a USB
keyboard or mouse no longer reacts to your inputs during operation.
How to enable/disable reinitialisation of USB input devices:
1. Press Ctrl+Num
2. Select the row
3. Under USB auto refresh
only faulty
all
off
4. Press to save your settings.
F2
78 · G&D VisionXS-F-DP-UHR
(default) to open the OSD.
and press
Console setup
press F8
 The status of the USB devices is monitored.
If communication to a USB device is interrupted, this
device is reinitialised (default).
 The status of the USB devices is monitored.
If communication to one USB device is interrupted, all
devices are reinitialised.
 The status of the USB devices is
If communication to a USB device is interrupted, the
device is not reinitialised.
.
Enter
to select one of the following options:
not monitored.