G&D VisionXS-F-DP-UHR Installation Und Bedienung Seite 178

Configuration
Changing the video mode of consoles
IMPORTANT:
The activation of the
and the connection to a second console module are prerequisites for this
transceiver
operation option.
In the standard configuration of the KVM extender, the computer's image is output at
the monitor of the active console as well as at the monitor of the concurrent console.
You can also specify that the image of the other console is temporarily or permanently
deactivated during console inputs.
How to select the video mode of a console:
1. Press
Ctrl+Num
2. Select the row
3. Under Video mode
always on
keep off
switch off
4. Press F2 to save your settings.
Related topics:
 Changing the time span of the input lock on page 64
 Right for exclusive access to the console on page 65
66 · G&D VisionXS-F-DP-UHR
Transm. Redundancy
(default) to open the OSD.
Console setup and press
press F8 to select one of the following options:
 The computer screen is displayed on both the monitor of the
active and the monitor of the concurrent console (default).
 The screen of this console is switched off permanently if an
entry is made on the concurrent console.
After the time period of the input lock has elapsed, you need to
make an entry on this console to switch on the screen again.
 The screen of this console is temporarily switched off whenever
an entry is made on the concurrent console.
After the time period of the input lock has elapsed, the screen is
automatically switched on again.
feature, an additional
Enter .
SFP