G&D VisionXS-F-DP-UHR Installation Und Bedienung Seite 127

Establishing a connection to the computer module
Transmission 1 Transmission 2 Transmission 2 Service Service
IMPORTANT:
The device uses components with laser technology which comply
with laser class 1.
Never stare directly into the beam when wearing optical instruments!
NOTE: Remove the protection caps from the Transmission interfaces and the cable
plugs.
Insert the LC plug of a fibre optic cable connected to the Transmis-
Transmission 1|Tx:
sion|Rx interface of the computer module or to one of the Dynamic Ports of a compa-
tible matrix (see page 5).
Transmission 1|Rx: Insert the LC plug of a fibre optic cable connected to the Transmis-
sion|Tx interface of the computer module or to one of the Dynamic Ports of a compa-
tible matrix (see page 5).
NOTE:
The activation of the
interface.
To use the Transmission 2
Choose the right SFP transceiver
The
Transm. Redundancy options
Transm. Redundancy feature.
Use the Transmission 2
part.
Network Network Pwr Main Power Pwr Main Power
Transm. Redundancy
interface, you need an additional SFP transceiver.
for your variant of the
contain both, a corresponding
interface to establish a connection with a second counter-
Red. Power Red. Power
feature activates the
VisionXS-F-DP-UHR
SFP transceiver
G&D VisionXS-F-DP-UHR · 15
Installation
Transmission 2
series.
and the