G&D VisionXS-F-DP-UHR Installation Und Bedienung Seite 192

Configuration
Selecting a keyboard layout for inputs via OSD
If the on-screen display shows other characters than entered on the console key-
board, the keyboard layout has to be adjusted.
Make sure which keyboard layout the connected keyboard uses and configure it in
the settings of the console module.
How to change the keyboard layout of the keyboard of the console module:
1. Open the remote OSD of the computer module by pressing the
(default: Ctrl+Num
Open the local OSD of the console module by pressing the
(default:
Alt+Num
2. Select the row
Keyboard/Mouse
3. Under OSD key. layout

german

english US

english UK
 french
 spanish
 lat. americ.
 portuguese

swedish

swiss-french

danish
4. Press F2 to save your settings.
80 · G&D VisionXS-F-DP-UHR
), if you want to change the hotkey for the remote OSD.
), if you want to change the hotkey for the local OSD.
Console setup and press
and press Enter (local OSD).
press F8 to select one of the following options:
Enter (remote OSD) or select the row
remote hotkey
local hotkey