G&D VisionXS-F-DP-UHR Installation Und Bedienung Seite 179

Activating a console after the permanent switch-off of the
image display
IMPORTANT: The activation of the
and the connection to a second console module are prerequisites for this
transceiver
operation option.
When selecting the
Image display
play is only switched on again after the time period of the input lock has elapsed
after a user input.
In the standard setting, inputs via both keyboards and mouse cause the display to be
switched on. Alternatively, you can allow only keyboard or only mouse as triggers to
activate the display of a console.
How to select the valid input device(s) to trigger the activation of a console:
1. Press Ctrl+Num
2. Select the row
3. Under
Activation
 keyb./mouse (default)
 keyboard only

mouse only
4. Press to save your settings.
F2
Related topics:
 Changing the time span of the input lock on page 64
 Right for exclusive access to the console on page 65
Transm. Redundancy
option
keep off
(default) to open the OSD.
and press
System setup
select one of the following options:
feature, an additional
/ (see page 66 f.) the dis-
Permanently off
.
Enter
G&D VisionXS-F-DP-UHR · 67
Configuration
SFP