G&D VisionXS-F-DP-UHR Installation Und Bedienung Seite 175

Changing the exclusive mode aktionkey
IMPORTANT: The activation of the
transceiver and the connection to a second console module are prerequisites for this
operation option.
After pressing the hotkey for the exclusive operation of the extender the input
devices of the concurrent console are disabled. Only after pressing the hotkey again
at the active console the KVM extender can again be operated by both consoles.
The hotkey for the exclusive operation consists of at least one hotkey modifier (see
Changing hotkeys on page 58) and an exclusive key. Both keys can be selected from a
number of available keys. You can change both, the hotkey modifier
exclusive key Print .
How to change the exclusive key:
1. Press Ctrl+Num
2. Select the row
3. Select the row
4. Under
Exclusive key
 Backspace key
Backspace
Print  Print key (default)
Scroll  Scroll key
 Num key
Num
Pause  Pause key
Insert  Insert key
Delete  Delete key
 Home key
Home
End  End key
PgUp  Page Up key
 Page Down key
PgDn
 Space key
Space
5. Press to save your settings.
F2
Transm. Redundancy
(default) to open the OSD.
System setup and press
Hotkey and press Enter .
press to select on of the following options:
F8
feature, an additional
Enter .
G&D VisionXS-F-DP-UHR · 63
Configuration
SFP
Ctrl and the