Configuration of channel auto-switching
IMPORTANT:
The activation of the
transceiver
and the connection to a second console module are prerequisites for this
operation option.
If the connection to the counterpart gets lost, the console module can automatically
switch to the other channel.
IMPORTANT:
Since the console module is identified by the same UID on both tras-
mission channels, it is not permitted to connect both channels to the same counter-
part.
How to configure the channel auto-switching:
1. Press
Alt+Num
2. Select the row
3. Under
Channel auto-switching
never
The channel accessed by the user is maintained in case of a
disconnection (default).
online
If a connection is terminated, the device auto-switches to the
other channel if this channel has an active connection.
always
If a connection is terminated, the device auto-switches to the
other channel regardless of the connection status of the other
channel.
4. Press
to save your settings.
F2
Transm. Redundancy
(default) to open the OSD.
Console utility
and press
press
to select on of the following options:
F8
feature, an additional
Enter
.
G&D VisionXS-F-DP-UHR · 61
Configuration
SFP