G&D VisionXS-F-DP-UHR Installation Und Bedienung Seite 136

Initial configuration of the network settings
Checking the availability of a host in the network (Ping)
The OSD can be used to test the availability of a particular host (e. g., a computer or
a network device) in the network.
How to check the availability of a host in the network:
1. Use the local hotkey
use the remote hotkey
module.
2. Select the entry
Enter .
3. Select the entry
4. Use the Host entry to enter the IP address or the host name and press
5. The test results are displayed in the following table:
Transmitted:
Received:
Lost:
Min. RTT:
Avg. RTT:
Max. RTT:
NOTE: A message informs the user if the host name cannot be resolved into an
IP address.
6. Press to leave the menu.
Esc
24 · G&D VisionXS-F-DP-UHR
(default: Alt + Num
(default: Ctrl + Num
Network (local OSD) or
and press
Ping host
number of transmitted data packets
number of received data packets
number of lost data packets
minimum round-trip-time
average round-trip-time
maximum round-trip-time
) to open the local OSD of the console module or
) to open the remote OSD of the computer
Network setup (remote OSD) and press
.
Enter
Enter .