G&D VisionXS-F-DP-UHR Installation Und Bedienung Seite 174

Configuration
Displaying information of channel auto-switching
IMPORTANT:
The activation of the
and the connection to a second console module are prerequisites for this
transceiver
operation option.
For the case that the connection to the counterpart gets lost and there is an auto-
matic channel switch, you have the option of displaying information about the
channel auto-switching.
How to configure the information of channel auto-switching:
1. Press Alt+Num
2. Select the row
3. Select the row
4. Enter the desired display duration from
can enter 0
(default) if the information should be displayed permanently or until the
OSD is used again.
5. Press F2 to save your settings.
62 · G&D VisionXS-F-DP-UHR
Transm. Redundancy
(default) to open the OSD.
and press
Console utility
Show auto-switching info
if you do not want any information to be displayed, or
feature, an additional
.
Enter
and press Enter .
5 to 99 seconds. Alternatively, you
SFP
perm