G&D VisionXS-F-DP-UHR Installation Und Bedienung Seite 176

Configuration
Changing the time span of the input lock
IMPORTANT:
The activation of the
and the connection to a second console module are prerequisites for this
transceiver
operation option.
When carrying out keyboard or mouse inputs at a console, the KVM extender auto-
matically locks the input devices of the concurrent console. The lock is lifted if no
input is made at the active console within the adjusted timing of the input lock
(default: 1 second).
After the lock has been lifted, both users can operate the computer again.
The time span of the input lock can be adjusted between 1 and 90 seconds.
How to change the timespan of the input lock:
1. Press
Ctrl+Num
2. Select the row
3. Under
Multiuser input lock
seconds).
4. Press to save your settings.
F2
Related topic:
 Operating the KVM extender exclusively on page 19
64 · G&D VisionXS-F-DP-UHR
Transm. Redundancy
(default) to open the OSD.
System setup and press
enter the desired timespan of the input lock (1 to 90
feature, an additional
Enter .
SFP