G&D VisionXS-F-DP-UHR Installation Und Bedienung Seite 171

Changing the OSD key
The hotkey to open the OSD consists of at least one hotkey modifier (see Changing
hotkeys on page 58) and an additional OSD key. You can freely select these keys
from a number of selectable keys.
You can change both the hotkey modifier and the OSD key.
How to change the current OSD key:
1. Open the remote OSD of the computer module by pressing the
(default: Ctrl+Num
Open the local OSD of the console module by pressing the
(default:
Alt+Num
2. Select the row
3. Select the row
4. Under (OSD action)key
OSD when pressing the OSD key together with the hotkey modifier(s):
Num  Num key (default)
Pause  Pause key
 Insert key
Insert
 Delete key
Delete
Home  Home key
End  End key
 Page Up key
PgUp
 Pace Down key
PgDn
Space  Space key
5. Press F2 to save your settings.
), if you want to change the hotkey for the remote OSD.
), if you want to change the hotkey for the local OSD.
System setup and press
Hotkey and press Enter .
, press F8 to select an OSD key. Now you can open the
Enter (remote OSD).
G&D VisionXS-F-DP-UHR · 59
Configuration
remote hotkey
local hotkey