G&D VisionXS-F-DP-UHR Installation Und Bedienung Seite 177

Right for exclusive access to the console
IMPORTANT: The activation of the
transceiver and the connection to a second console module are prerequisites for this
operation option.
If no inputs are made at the active console during the adjusted time span of the auto-
matic input lock (default: 1 second), the default settings of the KVM extender permit
the other console to operate the extender.
If the function right for exclusive console access is activated in the web application,
you are able to operate the KVM extender exclusively by pressing the hotkey
key+Print (default: Ctrl+Print
Pressing this key combination deactivates the input devices of the concurrent con-
sole. By pressing the key combination again at the active console, both consoles can
operate the KVM extender again.
NOTE: After the exclusive operation of the KVM extender has been activated at a
console, the Caps Lock, Num and Scroll Lock LEDs are blinking alternately at the
keyboard of the locked console.
The blinking Scroll Lock LED at the active console indicates that the exclusive
operation of the KVM extender is activated.
How to select the right to exclusively operate a console:
1. Press
Ctrl+Num
2. Select the row
3. Under Enable exclusive
yes  right for exclusive access is granted (default)
 right for exclusive access is denied
no
4. Press F2 to save your settings.
Related topics:
 Operating the KVM extender exclusively on page 19
 Changing the video mode of consoles on page 66
Transm. Redundancy
).
(default) to open the OSD.
Console setup and press
press F8 to select on of the following options:
feature, an additional
Enter .
G&D VisionXS-F-DP-UHR · 65
Configuration
SFP
Hot-