KEB COMBIVERT F5 Installationsanleitung Seite 33

COMBIVERT F5 inverter with integrated safety technology correspond to the following nu-
merical code:
Control HW used
1KF5x30-0009 up to housing size E
2KF5x30-0008 from housing size G
Validity of
certificates
Inverter
xxF5Kxx-xxxx
xxF5Kxx-xx0x
xxF5Lxx-xxxx
xxF5Pxx-xxxx
The certification of controllers with safety tech-
nology since 05.2013 is only valid if the material
number corresponds with the specified numerical
code and the FS logo is printed on the type plate.
Preface
Control SW Operating
(ud.02)
APPLICATION
with encoder MULTI
interface
APPLICATION
without encod- GENERAL
er interface
ASCL MULTI
SCL SERVO
mode
GB - 7