Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Rcs web
8.3 OPERATION WITH RCS WEB SOFTWARE
The main window opened is the login window. On that window,
user could introduce his username and password to log into the
system. There are also small user configurations that are:
•
Language selection: it allows switching the language that the
software uses when it will be started. Available languages are
English, Español, Català, Italiano, Français, Deutsch, Neder-
lan, Portugues, Czech and Russian.
•
Remind password: systems remember the last username and
password configured due to avoid the retyping of these items.
•
Automatic login on startup: If system reminds the password, it
will automatically connect when software is started.
N O T E
• If software is moved into the start-up menu of windows it will
be started when computer will be switched on.
• Marking automatic login on start-up, this window will not be
shown.
The installation lists shows the configured CSNET WEBS and if
there are connected or not. The state of connection will switch
only when user will start log in.
Once the user is connected, it will appear an interface that looks
a remote control.
This interface is equivalent to the building layout one with few
improvements that helps to be a central control.
The controllable things will be Run/Stop, setting temperature,
mode, fan, louver and central. They are exactly as the Building
layout remote control. It is possible to find more information on
Building Layout
chapter.
In case of central it will be enabled only if installer gives privileges
to the user to control this, and when one central value is activated
the buttons corresponding to that lockage will be disabled.
Log out will return to the login window, and exit will close the
application.
The combo box on the upper part will be used to select between
units if there are more than one. The displayed text will be the
location field stored on the HARC. If this text does not exist, it
will write "Unit:[X,Y,Z]" knowing that values as the slot, outdoor
address and indoor address of the unit. It also will show the state
of the unit based on the text color.
If user close the window using the cross button, application will
still run setting an icon on the system tray.
Clicking twice over the system tray icon will open the application.
Using right button of the mouse over it will open a little menu that
will allow to the user between close completely the application or
open it.
24
PMML0164A rev.2 - 10/2012
Werbung
