Operation
7.2 OPERATION WITH WATER CHILLERS
7.2.1 Description of the Water Chillers Table
The Water Chiller Table has one row for each water chiller; the columns contain the following information:
Address: water chiller address.
•
•
Location: name assigned to the water chiller, for example re-
ferring to the area in which it operates or its primary function.
•
On/Off: indicates if the water chiller is On
Central: indication showing whether the water chiller is confi-
•
gured for local
or central
7.2.2 Setting of Water Chillers
This option shows the parameters which can be selected for each water chiller.
1
2
After selecting the parameters to be adjusted, press Update to
send the order to the units selected or Cancel to cancel the ope-
ration.
1 Select the unit
The unit selected in the table of units is identified by the descrip-
tion field.
Using the Set by field, select the group of units whose parame-
ters you want to adjust:
Single Unit: the unit selected
•
All units: all the units controlled by CSNET-WEB
•
20
or Off
control.
PMML0164A rev.2 - 10/2012
•
Mode: Operation mode of the Water Chiller: Cool
•
TsC: Setting temperature (water outlet temperature) for the
.
chiller when in cooling mode.
•
TsH: setting temperature (water outlet temperature) for the
chiller when in heating mode.
•
Timer: timer used by this water chiller.
2 Adjust parameters
Click with the mouse on the parameter you want to select.
Select the temperature with the buttons "" or ">".
, Heat