Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Configuring the software
6 CONFIGURING THE SOFTWARE
Once the CSNET WEB inteface has been configured, you must
proceed to system configuration. To install the RCS Web instead
of CSNET WEB read the chapter RCS Web. remember that RCS
Web is a reduced version of CSNET WEB with only remote con-
trol functions but more user-friendly for a non-expert user.
Start the CSNET WEB application from the direct access on your
PC. If the application has not been installed on your PC, or if you
must temporarily change the system's network configuration, pro-
ceed as explained in chapter Configuring the hardware.
C A U T I O N
Remember that, in order to access CSNET WEB by direct access
you must connect the computer to the Ethernet network that is
connected to the CSNET WEB interface.
N O T E
The ID must be typed exactly as shown, upper case and lower
case letters must be respected
You must type Installer the first time you enter the application
Password:
The initial password for the Installer user name is: Installer
The initial password for the User user name is: User
CSNET WEB home screen
11
PMML0164A rev.2 - 10/2012
When you click the direct access, the data that you must enter
will be displayed on the screen:
User ID: ID of the User Type that will connect to CSNET WEB
There are two possible users:
Installer: May access all options. It is recommended that only
authorised persons and persons who know the program have ac-
cess to this option.
User: May only access "Settings", and may display the "Timer"
page (Timer)
Installation:
Choose the installation you whish to connect. By default, it must
be an installation named Default
You can enter the IP of CSNET WEB you want to connect to.
By default, it must be the same as the one that was previously
entered (192.168.0.3).
N O T E
You can create installations using Local Computer Configura-
tion.
Werbung
