Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Configuring the hardware
5 CONFIGURING THE HARDWARE
After completing and checking the electrical installation, ensure
that all the air conditioning units are running, and supply power
to CSNET WEB in order to configure the CSNET WEB interface
1 Connect the computer that will be used for configuration to
CSNET WEB with a crossed Ethernet cable.
2 Insert the CD-ROM that is supplied with the CSNET WEB
package into the computer that is already connected. If the
Windows auto-start option is enabled, the installation pro-
gramme will start automatically; if this option is not enabled,
execute the Autoinstall.exe application that is included in the
CD-ROM.
3 The initial page for the installation will be displayed with the
following options:
CSNET WEB Configurator: open the CSNET WEB Confi-
•
gurator interface in order to configure and install your insta-
llation.
6
PMML0164A rev.2 - 10/2012
•
IP Change: Open the network settings of your system
allowing change the IP of your computer.
•
CSNET WEB Software: execute the CSNET WEB Software
from the CD.
•
CSNET WEB client software: Install a copy of CSNET WEB
in the local computer.
•
CSNET WEB Manual: opens the technical catalogue of CS-
NET WEB.
Upgrade CSNET WEB hardware: Upgrade the firmware of
•
your CSNET WEB using our interface.
•
Building Layout Software: Execute the Building Layout Edi-
tor in order to use this application to create a Building Layout
file.
•
RCS Web Software: Install a copy of RCS in the local com-
puter.
Werbung
