WIKA F5301 Betriebsanleitung Seite 5

2. Design and function
Abbreviations, definitions
2-wire The two connection leads are used for the voltage supply.
The measuring signal also provides the supply current.
3-wire Two connection leads are used for the voltage supply.
One connection lead is used for the measuring signal.
UB+ Positive power supply terminal
UB- Negative power supply terminal
S+ Positive signal output
S- Negative signal output
UR+ Positive power supply terminal for relay (signal jump)
UR- Negative power supply terminal for relay (signal jump)
x-pin Pin assignment
Shield Case
2. Design and function
2.1 Overview

Exemplary illustration based on model F5301.
Axle retainer groove

Measuring spring

Electrical connection

Operating instructions, models F5301, F53C1, F5308, F53C8, F53S8
F

F
EN

5