Werbung
Verfügbare Sprachen
Verfügbare Sprachen
5. Commissioning, operation
5.3 Mounting the load pin
Operating instructions, models F5301, F53C1, F5308, F53C8, F53S8
Axle retainer
Force direction arrows
Load pin
Axle retainer groove
Force introduction
Load pin mounting position
Connection of the load pin (e.g. fork bearing)
The axle retainer to DIN 15058
■
be fastened such that the load pin
secured in the installation situation
against twisting and axial play.
The axle retainer
■
subjected to loads (e.g. axial loads)
while mounted.
Use only captive fasteners for the axle
■
retainer
.
The axle bracket
■
deflection in the load direction. Please
observe the information given in DIN
15058 for axle retainers.
Prior to installation, observe the force
■
direction arrows
of the load pin
and the mounting
position.
It must be ensured that there are no
■
force shunts in the mounted condition.
Introduce the load pin
■
the mounting position
using the axle retainer groove
reference for aligning the load pin
The force introduction
■
may not move and must be mounted
such that an axial shift is not possible.
No force shunt may be produced.
Align the load pin
■
axle retainer
.
must
is
must not be
must not hinder the
on the front face
carefully into
(fork bearing),
as
.
in the centre
and mount the
15
EN
Werbung
