Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Model
Settling time
Ingress protection
(per EN/IEC 60529)
Electrical protection
Vibration resistance
Shock resistance
Immunity
1) The load pins with ignition protection type "ib" must only be supplied using galvanically-isolated power supplies.
Suitable supply isolators are also optionally available, e.g. order number: 14255084.
2) Relative linearity error is specified in accordance with guideline VDI/VDE/DKD 2638 chapter 3.2.6.
3) Other signal jumps are realisable on request.
4) Other settling times possible on request.
Attention: For ATEX equipment, observe the additional operating instruction: 14537280 for Ex
equipment. ATEX equipment is labeled and certified under the brand tecsis.
Mounting situation of the load pin
Pin retainer (in accordance with DIN 15058)
Dimensioning: The customer-specific load pin drawing of the respective order number has priority.
For further specifications, see WIKA data sheet FO51.18 and the order documentation.
Operating instructions, models F5301, F53C1, F5308, F53C8, F53S8
F53C1
1)
ATEX/IECEx EX ib
≤ 2 ms (within 10 ... 90 % F
IP67
Reverse polarity protection, overvoltage and short-circuit
resistance
20 g, 100 h, 50...150 Hz (according to DIN EN 60068-2-6)
In accordance with DIN EN 60068-2-27
In accordance with DIN EN 61326-1/DIN EN 61326-2-3
■
EMC-strengthened versions
■
"Force direction" symbol applied
F5301
Signal jump
4)
)
nom
Ground connection
M6-12/8 deep
EN
31
Werbung
