Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Timer
Adding the new Timer
1.
Touch the
button on the control panel.
2.
Select Timer, and then press the Dial Knob.
3.
On the Timer screen, select
, and then press the Dial Knob.
•
Skip this step if you are adding the timer for the first time.
4.
Set the time.
Editing the existing Timer
Touch the
button on the control panel.
1.
2.
Select Timer, and then press the Dial Knob.
3.
On the Timer screen, select the Timer you want to edit, and then press the Dial
Knob.
4.
Change the time.
Deleting the Timer
Touch the
button on the control panel.
1.
2.
Select Timer, and then press the Dial Knob.
3.
On the Timer screen, select
, and then press the Dial Knob.
4.
Select Delete on the right side of the Timer you want to delete, and then press
the Dial Knob.
Select Done, and then press the Dial Knob.
5.
Using the Timer
1.
Touch the
button on the control panel.
2.
Select Timer, and then press the Dial Knob.
3.
Select START on the right side of the Timer you want to use, and then press
the Dial Knob.
Once you start the timer, you can pause or cancel the timer.
•
NOTE
When the time has elapsed to a set point, a message of "Time is up." appears with
a melody. Select OK, and then press the Dial Knob to dismiss the message.
Cleaning
Steam Clean
This is useful for cleaning light soiling with steam.
This automatic function saves you time by removing the need for regular manual
cleaning.
1.
Touch the
button on the control panel.
2.
Select Cleaning, and then press the Dial Knob.
Select Steam Clean, and then press the Dial Knob.
3.
4.
Follow the instruction on the screen, select Next, and then press the Dial Knob.
5.
Select START, and then press the Dial Knob.
WARNING
Do not open the door before the cycle is complete. The water inside the oven is
very hot, and it can cause burns.
NOTE
•
If the oven is heavily soiled with grease, for example, after roasting or grilling,
it is recommended to remove stubborn soil manually using a cleaning agent
before activating Steam cleaning.
•
Leave the oven door ajar when the cycle is complete. This is to allow the
interior enamel surface to dry thoroughly.
•
While the oven is hot inside, auto cleaning is not activated. Wait until the oven
cools down and try again.
•
Do not pour water onto the bottom by force. Do it gently. Otherwise, the water
overflows to the front.
English 21
Werbung
