Ammann AVP 1240-2 Originalbetriebsanleitung Seite 49

3.4.2 If the engine starts
1 – 2 min.
3
GX 120_013.cdr
– Adjust engine speed control lever (3) to idle position.
– Allow the engine to warm up for 1 ... 2 minutes.
OPEN
GX 120_007.cdr
– As the engine warms up, gradually move the choke lever (2) to
the «OPEN»-position.
MIN
MIN
2
OPEN
3.4.3 Switching off the engine
3
GX 120_006.cdr
– Adjust engine speed control lever (3) to idle position.
OFF
GX 120_008.cdr
– Turn engine switch (4) to «OFF».
OFF
GX 120_009.cdr
– Move fuel tap (1) to «OFF».
In an emergency situation, set the engine switch (4) to
«OFF» in order to switch off the engine.
Important
44
3. Operation
MIN
4
0
1
OFF
MIN
OFF