Transfer - Otto Bock Motus Bedienungsanleitung

During reassembly, ensure that the footrest locking device has engaged.
INfORMATION
The standard equipment includes removable quick-release axles on the rear wheels which fa-
cilitate transportation of your wheelchair.
To remove the rear wheels, press the button on the quick-release axle as described in Chapter
3. The rear wheels can then be removed. (fig. 1).
Accident risk�
CAUTION
holes and that the quick-release rear wheel axles and casters securely lock into their axle hous-
ings. The rear wheels and casters must not be removable without the button being depressed!
Check the function of the brakes.

4.1 Transfer

Transfer into the wheelchair is described below. The Motus is designed for persons who normally
move around in the wheelchair independently. Therefore, the independent transfer is described.
Should you require an attendant, the steps described here are carried out correspondingly but
with support.
Maneuver the wheelchairs so that they are positioned at an angle of approx. 45° degrees to
each other (fig. 11). Ensure that the wheel locks do not get caught in each other but remain freely
movable. First activate the wheel locks of the wheelchair that is currently in use (fig.12).
9
During assembly, confirm that all bolts engage in the corresponding bore
11
10
12
47