Dometic PERFECTVIEW CAM55W Montage- Und Bedienungsanleitung Seite 11

CAM55/55W
Observe the following instructions when working with electrical parts:
• When testing the voltage in electrical cables, only use a diode test lamp
(fig. 1 8, page 2) or a voltmeter (fig. 1 9, page 2).
Test lamps with an illuminant (fig. 1 12, page 2) take up voltages which are too
high and which can damage the vehicle's electronic system.
• When making electrical connections, ensure that
– They are not kinked or twisted
– They do not rub on edges
– They are not laid in sharp edged ducts without protection
(see fig. 3, page 3)
• Insulate all connections.
• Secure the cables against mechanical wear with cable binders or insulating tape,
for example to existing cables.
The camera is watertight. However, the sealings on the camera cannot withstand a
high-pressure cleaner (fig. 4, page 3). Therefore, you should observe the following
instructions when handling the camera:
• People (including children) whose physical, sensory or mental capacities or
whose lack of experience or knowledge prevent them from using this product
safely should not use it without the supervision or instruction of a responsible
person.
• Do not open the camera, as this impairs the sealing and the function of the
camera (fig. 5, page 3).
• Do not pull at the cables, as this impairs the sealing and the function of the camera
(fig. 6, page 3).
• The camera is not suitable for submerged operation (fig. 7, page 3).
EN
Safety and installation instructions
11