j) Switch LED Lamps On/Off
The LED lamps of the vehicle can be switched on or off
with a switch (see mark in the figure on the right).
k) Stopping the Vehicle
To stop driving, proceed as follows:
• Let go of the throttle/brake lever on the transmitter so that it goes into neutral position, and let the vehicle run out.
• After the vehicle has stopped, switch off the speed controller (switch position "OFF").
Never touch the wheels or the drive mecha-
nism, and make sure you do not move the
throttle/brake lever at the transmitter! Do not
hold the vehicle at its wheels!
Attention!
The motor, the speed controller and the drive
battery get hot during operation! Do not touch
these parts immediately after operation. Dan-
ger of burns!
• Disconnect the drive battery from the speed controller. Disconnect the plug-in connection completely.
• Now you may turn off the transmitter.
44