User Information; Important Notes; Safety Instructions; Electromagnetic Compatibility (Emc) - Bosch FSA 500 Originalbetriebsanleitung

en | 20 | FSA 500 | User information
2.

User information

2.1

Important notes

Important information on copyright, liability and
warranty provisions, as well as on equipment users
and company obligations, can be found in the separate
manual "Important notes on and safety instructions
for Bosch Test Equipment". These instructions must
be carefully studied prior to start-up, connection and
operation of the FSA 500 and must always be heeded.
2.2

Safety instructions

All the pertinent safety instructions can be found
in the separate manual "Important notes on and
safety instructions for Bosch Test Equipment". These
instructions must be carefully studied prior to start-
up, connection and operation of the FSA 500 and must
always be heeded.
2.3

Electromagnetic compatibility (EMC)

FSA 500 satisfies the criteria of the European Directive
EMC 2014/30/EU.
This device is not intended for use within residential
areas and cannot provide sufficient protection in such
environments.
2.4

Measuring category

FSA 500 complies with the general safety
requirements for electrical testers, measuring
instruments and accessories in EN 61010-1 and
EN 61010-2-030.
FSA 500 is designed for test and measurement circuits
with no direct mains voltage system connection
(Category I, motor vehicle testers).
2.5

RED (Radio Equipment Directive)

Robert Bosch GmbH hereby declares that the radio
equipment type FSA 500 conforms to the European
Directive 2014/53/EU. The complete text of the
EU declaration of conformity is available from the
following web address:
http://www.downloads.bosch-automotive.com
i
In non-European countries, the corresponding
national regulations on the operation of wireless
devices in the 2.4 GHz and 5 GHz frequency band
must be heeded (e.g. WLAN or Bluetooth).
|
1 689 989 411 2023-03-24
2.6

Wireless connections

i
Users of wireless systems are responsible for
compliance with the applicable directives and
restrictions in the country concerned.
A "wireless system" in the sense of the European
Directive RED 2014/53/EU (Radio Equipment
Directive) is an electrical or electronic product
(component) that transmits and/or receives radio
waves as permitted for the purpose of wireless
communication and/or radiolocation.
WLAN and Bluetooth instructions can be found in the
separate instructions "Data protection, data security,
wireless connections".
http://mediathek.bosch-automotive.com/files/common/documents/1689/989393.pdf
These instructions must be carefully studied prior to
start-up, connection and operation of the FSA 500 and
must always be observed.
2.7

Bluetooth

2.7.1

Bluetooth USB adapter

The Bluetooth USB adapter included in the scope of
delivery is inserted into the PC/laptop and provides
a radio link to components of FSA 500 capable of
wireless communication.
2.7.2

Troubleshooting

i
In the event of problems with the Bluetooth radio
link, refer to the information in the separate
instruction "Bluetooth USB Adapter".
http://mediathek.bosch-automotive.com/files/bosch_wa/989/277.pdf
2.8

Information on CoRe

The "CoRe" software (Connected Repair) makes it
possible to exchange customer and vehicle information
as well as protocols in the workshop. For this, the
testers (CoRe clients) are connected to a central
computer (CoRe server) via the computer network.
Related documents:
Current overview of products supporting CoRe:
http://mediathek.bosch-automotive.com/files/common/documents/1689/989386.pdf
Notes on system requirements, installation and other
information on CoRe:
http://mediathek.bosch-automotive.com/files/common/documents/1689/989372.pdf
Robert Bosch GmbH