User Instructions; Important Notes; Safety Instructions; Disposal - Bosch FSA 720 Betriebsanleitung

2.

User instructions

.1

Important notes

Important notes on the agreement pertaining to copy-
right, liability and warranty, about the user group and
obligation on the part of the contractor, are available
in the separate instructions entitled "Important notes
and safety instructions on Bosch Test Equipment".
These are to be read thoroughly before using, con-
necting and operating the product and they must be
observed.
.

Safety instructions

All safety instructions are available in the separate in-
structions "Important notes and safety instructions" on
Bosch Test Equipment". These are to be read thorough-
ly before using, connecting and operating the product
and they must be observed.
.3

Disposal

This product is subject to European guide-
lines 00/96/EG (WEEE).
Old electrical and electronic devices, including
cables and accessories or batteries must be
disposed of separate to household waste.

Please use the return and collection sys-
tems in place for disposal in your area.

Damage to the environment and hazards to
personal health are prevented by properly
disposing of old equipment.
.4

Electromagnetic compatibility (EMC)

This product is a product of Class A as under
EN 55 022.
i
This product can cause radio interference in the
home; in this case the operator may be asked to
implement appropriate measures.
Bosch Diagnostics
User instructions | FSA 70 | 17
3.

Product description

3.1

Application

The FSA 720 vehicle system analysis is a modular test
system for test engineering purposes in automotive
workshops. FSA 720 records vehicle-specific signals
and routes them via the USB interface to a Windows-
based PC (not part of the delivery specification). The
FSA system software is installed on the PC.
The FSA system software contains the following functions:

Vehicle identification.

Settings.

Vehicle system analysis with.
$
test steps (testing of gasoline and diesel engines).
$
URI.
$
signal generator (e.g. for testing of sensors).
$
component test (testing of vehicle components).
$
characteristics recorder.
$
multipurpose oscilloscope.
$
ignition oscilloscope, primary.
$
ignition oscilloscope, secondary.
To assess test results, comparison curves of test curves
that have been adjudged to be OK can be stored in the
measuring system.
The KTS 540 (special accessories) can be used to per-
form control unit diagnostics via the ESI[tronic]
Additionally, the FSA 720 can be expanded to become
an exhaust-emission analyzer
i
To use the vehicle-specific test instructions
vehicle-specific target data
extension to the component test will require a
CompacSoft[plus] subscription to be taken out.
A release is also required for these functions. The release is
*)
performed using DSA. How to proceed in this case is described
in the DSA's online help.
en
.
*)
, the
*)
as well as the future
*)
|
1 689 979 894 2007-01-30