User Instructions; Documentation; Bea 460; Safety Instructions - Bosch BEA 460 Instandsetzungsanleitung

1.

User instructions

1.1

Documentation

Pictograms linked with the key words Danger, Warning
and Caution are warnings and always indicate an imme-
diate or potential hazard to the user.
Danger!
Immediate danger that could cause serious
personal injury or death.
Warning!
Potentially dangerous situation that could
cause serious personal injury or death.
Caution!
Potentially dangerous situation that could
cause personal injury or damage to property.
!
Important – warns of a potentially hazardous situa-
tion in which the BEA 460, the test sample or other
object in the vicinity could be damaged.
In addition to these warnings, the following symbols are
also used:
i
Info – In addition to these warnings, the following
symbols are also used.
¶
Single-step procedure
that can be completed in just one step.
?
Intermediate result
displayed during a procedure.
"
Final result – the final result is displayed at the end
of the procedure.
1.2

BEA 460

Disposal
Old electrical and electronic devices, including
cables and accessories or batteries must be
disposed of separate to household waste.
Robert Bosch GmbH
– instructions for a procedure
– an intermediate r esult is
User instructions | BEA 460 | 11
1.3

Safety instructions

The pertinent safety instructions for each product must
always be heeded. All safety instructions can be found
in the following manuals:
R
"Test Equipment" (1 689 979 922)
R
"BEA 050" (1 689 989 027)
Danger - electric shock!
Inexpert working on open, live devices can
lead to electric shocks, heart failure and even
death.
¶
Work on open, live devices is only perfor-
med by authorized and qualified service
engineers.
¶
Observe the electrical engineering safety
regulations (e. g. BGV A3 in Germany).
¶
Prior to start-up, perform safety checks in
accordance with national legislation (e. g.
VDE 0701/0702 in Germany).
¶
Keep all appropriate land regulations.
Caution - Destruction of electrotechnical
units!
During inappropriate handling of printed
cicuit boards, electrostatically endangered
construction units can be damaged.
¶
Heed the handling instructions relating to
ESD.
i
The handling instructions relating to ESD can be
found in EDIS.
1.4

Target group

The service work is only to be performed by quali-
fied and trained Service personnel from Robert Bosch
GmbH or organizations commissioned by Robert
Bosch GmbH. No warranty claims will be accepted if
devices have been opened or modified by non-author-
ized persons.
1.5

Abbreviations

AMM Exhaust-gas analyzer module
BEA Bosch-Emissions-Analysis
DTM Speed and temperature module
EDIS Electronical document and information system
KD Customer service
RTM Smoke opacity module
OBD On board diagnostics
ppm parts per million
BEA 460 | 11 | 11 en
|
1 689 975 210 2008-11-07