Approved M/Dprocedure For Uhp And Run Flat Tyres - HPA-Faip M 928 ROYAL Betriebs- Und Wartungsanleitung

8• Set the bead breaking unit to the rest
position
9• Tyre inflation
- For inflation, see "INFLATION" section
10 • Unclamping the wheel from the turntable
(fig. 30)
- Loosen the device by turning the handles 1
anticlockwise (A).
- Press the retainers 2 and move the centring
cone away from the rim by hand (B).
- Turn the clamping device anticlockwise to release
it from the turntable (C).
- Remove the device from the rim (D).
A
B
D
User Manual M 928 ROYAL
11 • Tyre unloading (fig. 31)
- Lower the wheel lifter (pedal 29) and position
the wheel on it by hand (A).
- Lower the lifter (pedal 29) (B).
- Remove the wheel from the lifter.
29a
C
PROCEDURE FOR UHP AND
For the detailed M/D procedure for UHP and
RUN FLAT tyres, please refer to the instruction
manual wrote by WDK (German Association
30
of the Tyre Industry)
APPROVED M/D
RUN FLAT TYRES
29
31
79