Introduction; Transport, Storage And Handling; Conditions For Transporting The Machine - HPA-Faip M 928 ROYAL Betriebs- Und Wartungsanleitung

INTRODUCTION

The purpose of this manual is to furnish the
owner and operator with a set of practical, safe
instructions on the use and maintenance of the
M 928 ROYAL tyre changer.
Follow all the instructions carefully and the
machine will give you the efficient and long-
lasting service that has always characterised
SIMPESFAIP products, making your work
considerably easier.
The following points define the levels of danger
regarding the machine, associated with the
warning captions found in this manual:
DANGER
Refers to immediate danger with the risk of
serious injury or even death.
WARNING
Dangers or unsafe procedures that can cause
serious injury or even death.
CAUTION
Dangers or unsafe procedures that can cause
minor injuries or damage to property.
Read these instructions carefully before powe-
ring up the machine. Keep this manual and all
illustrative material supplied with the machine
in a folder near the tyre changer where it is rea-
dily accessible for consultation by the machine
operators.
The technical documentation supplied is consi-
dered an integral part of the machine; and must
always accompany the equipment if it is sold or
transferred to a new owner.
The manual is only to be considered valid for the
machine of the model and with the serial number
indicated on the nameplate applied to it.
WARNING
Observe the contents of this manual: The
producer declines all liability in the case of
uses of the machine not specifically described
and authorised in this manual.
WARNING
This machine must be used only by qualified
and authorised personnel. A qualified opera-
tor is construed as a person who has read and
understood the tyre changer manufacturer's
instructions as well as the tyres and wheel
rims manufacturers', is suitably trained, and
is conversant with safety and adjustment pro-
50
cedures to be adhered to during operations.
Use of the machine by unskilled staff may
constitute a serious risk for the operator and
for the final user of the product processed
(the wheel rim and tyre assembly).
NB:
Some of the illustrations in this manual have
been taken from photographs of prototypes:
standard production machines may vary in
some respects.
These instructions are intended for people with
basic mechanical skills. We have therefore omit-
ted detailed descriptions of procedures such as
how to loosen or tighten the fixing devices on the
machine. Do not attempt to perform operations
unless properly qualified and with suitable ex-
perience. In case of need, contact an authorised
Service Centre for assistance.
TRANSPORT, STORAGE
AND HANDLING
Conditions for transporting the
machine
The tyre changer must be transported in its ori-
ginal packing and stowed in the position shown
on the external packing.
- Packing dimensions:
• width ............................................1543 mm
• depth ........................................... 1140 mm
• height ...........................................1900 mm
- Weight of wooden packing:
• ......................................................... kg 380
Ambient conditions for machine
transport and storage
Temperature: -25° ÷ +55°C.
WARNING
Do not stack other goods on top of the packing
to avoid damaging it.
User Manual M 928 ROYAL