Transport, Storage And Handling; Conditions For Transporting The Machine; Ambient Conditions For Storage And Transport; Handling - HPA-Faip M 424 Betriebs- Und Wartungsanleitung

TRANSPORT,
STORAGE AND

HANDLING

Conditions for transporting the
machine
The tyre changer must be transported in
its original packing and maintained in the
position shown on the outer packing.
- Machine packing dimensions:
• width ..........................................mm 880
• depth ........................................mm 1140
• height .........................................mm 970
- Shipping weight:
• in cardboard...............kg 250 (kg 265 FS)
• in wood........................kg 260 (kg 275 FS
Ambient conditions for storage
and transport
Temperature range from -25° to +55°
WARNING
Do not stack other goods on top of the
packing or damage may result.
Handling
To move the packed machine insert the
forks of a pallet truck in the channels in the
base of the pallet (fig.1).
Before moving the machine refer to the
chapter HOISTING AND MOVING.
ATTENTION
Keep the packing material intact for
possible future transport of the machine.
M 424 - M 424 FS
UNPACKING /
ASSEMBLY
WARNING
Take the utmost care when unpacking,
assembling, and setting up the machine
as described in this heading.
Failure to observe these instructions can
lead to damage to the machine and injury
to the operator or other persons.
- Remove the upper part of the packing
and make sure that the machine has not
suffered damage in transit; identify the
points at which the machine is anchored
to the pallet.
- The machine comprises five main sections
(fig. 1):
1 head
2 air tank (FS version only)
3 box with pressure gauge (FS version only)
4 column guard
5 body
- Once the head 1 has been freed, it should
be placed horizontal to prevent the risk
of damage.
1
41