Unpacking/Assembly - HPA-Faip M 928 ROYAL Betriebs- Und Wartungsanleitung

Handling
To move the packing, insert the tines of a fork-lift
truck into the slots on the base of the packing
itself (pallet) (1-fig. 1).
Before moving the machine, refer to the HOI-
STING/HANDLING section.

UNPACKING/ASSEMBLY

WARNING
Take utmost care when unpacking, assembling,
hoisting and installing the machine as described
in this heading.
2
4
1
User Manual M 928 ROYAL
Keep the original packing in good conditions to
be used if the equipment has to be shipped in
the future.
Failure to comply with these instruction may
damage the machine and risk the operator's
safety.
Remove the upper part of the packing.
The machine is fully assembled, comprising two
main groups, 2- the machine, 3- the accessories,
(fig. 1).
Identify the points 4 and 5 at which the machine
is anchored to the pallet and proceed to remove
fixing devices. (fig. 1)
5
3
1
51