Technical Data - HPA-Faip M 928 ROYAL Betriebs- Und Wartungsanleitung

- A pedal-controlled pneumatically operated
wheel lift (optional) which loads and unloads
the wheel to and from the working position
With the M 928 ROYAL tyre changers the fol-
lowing aims have also been achieved:
- Minimised physical effort on the part of the
operator
- No risk of damage to rim and tyre
Each machine carries a plate with its identification
data and some technical data.
As well as the manufacturer's details, it indi-
cates:
Mod. - Machine model; V - power supply voltage
in Volts; A - Input voltage in Amperes; kW - Ab-
sorbed power in kW; Hz - Frequency in Hz; Ph
- Number of phases; bar - Operating pressure
in bar; Serial No. - Machine serial number; ISO
9001 - Certification of the company's Quality
System; EC - EC marking.
WARNING
It is forbidden to modify or remove the data
in the plate.
56

TECHNICAL DATA

- Overall dimensions (see fig. 7):
• Length ......................................... 1235 min
• Width ........................................... 928 min –
• Height .......................................... 1170 min
- Wheel dimension range:
• rim diameter ........................ from 12" to 28"
• maximum tyre diameter ........ 1080 mm (42")
• max tyre width ........................................15"
(from wheel supporting base)
- Turntable:
• resting side: ..................................... flanged
• centring: .......................................... on cone
• clamping: ......................mechanical-manual
• drive system: ....2-speed motor-inverter unit
• rotation torque: ............................. 1200 Nm
• rotation speed: .............................. 6-15 rpm
- Bead Breaking Unit:
• tool: ...................................................... disc
• positioning in relation to rim: ........................
manual with mechanical clamping
• penetration: ...................................... guided
• maximum bead breaking range ... A = 670 mm
• bead breaker stroke ................... B= 540 mm
• bead breaking cylinder force: ......... 5500 N
- Wheel lifter: ............................ ON REQUEST
• lifting operation: ........................... automatic
• activation: ................................... pneumatic
• lifting capacity: .................................... 85 kg
- Power supply:
• electric, 1Ph ................................. 230V-0.75
• electric, 1Ph (alternate) ............... 110V-0.75
• pneumatic operating pressure: ..........10 bar
- Weight: ................................................380 kg
- Weight of electrical/
electronic components: ......................11.5 kg
- Noise level:
• A-weighted sound pressure level
(L ) at the working position ........ < 70 dB (A)
pA
User Manual M 928 ROYAL
– 1784 max
2018 max
– 2184 max
(see diagram page 13)
(see diagram page 13)
manual tilting
kW 50Hz/60 Hz
kW 50Hz/60 Hz