Glossary; Trouble Shooting - HPA-Faip M 928 ROYAL Betriebs- Und Wartungsanleitung

GLOSSARY

Air delivery regulator. Union allowing regulation
of the air flow.
Beading. Operation which takes place during
inflation and ensures perfect centring between
the bead and the rim edge.
Bead breaking. Operation in which the bead of
the tyre is detached from the edge of the rim.
Bead pressing gripper. A tool intended for use
when mounting the top bead. It is fitted so that it
grips the shoulder of the rim and holds the tyre
top bead inside the drop centre. It is generally
used for mounting low profile tyres.
Tubeless Inflator. An inflation system which
simplifies inflating tubeless tyres.
88

TROUBLE SHOOTING

Turntable will not turn
Power cord conductor shorting to ground.
• Check the wiring.
Motor shorted.
• Replace the motor.
• Replace motoinverter circuit board.
• Check pedal board micro.
Belt broken.
• Replace belt.
Rotation control pedal fails to
return to central position
Control spring broken.
• Replace the control spring.
Bead breaking unit not working
No vertical movement.
• Check for folded hoses.
• Check ascent and descent valve operation.
Bead breaking unit is
underpowered, does not break the
bead and is leaking air
Carry out the checks in the previous point:
"Bead breaking unit not working".
Cylinder gaskets worn.
• Replace gaskets.
• Replace bead breaker cylinder.
Bead breaker cylinder leaks air
around the rod
Air gaskets worn.
• Replace gaskets.
• Replace bead breaker cylinder.
Gear unit noisy. The table top makes 1/3 of
a spin and then stops
Gear unit seizing.
• Replace gear unit.
Table top fails to clamp rims
Handle engagement unit faulty.
• Check it is synchronised properly.
• Replace the plate of the turntable.
• Check there are no burrs.
• Replace the locking handle.
User Manual M 928 ROYAL