Timer Function; Use As A Timer; Use As A Cooking Time Limit - hanseatic MC-IF7127B2C-A Gebrauchsanleitung

Page EN-18

Timer function

Timer function
You can use the timer function as a timer or a
cooking time limiter for one or more cooking
zones/areas.
The maximum timer setting is 99 min-
utes.

Use as a timer

The hob must be switched on for you to
use the timer.
Setting the alarm time
0 0
(13) (12)
Example: You want to set an alarm for 35
minutes.
1. Tap the timer sensor (13).
The " " on the units position will begin to
0
flash.
2. Use the slider sensor (12) to set "
3. Touch the timer sensor once again.
The " " on the tens digit will begin to flash.
0
4. Use the slider sensor (12) to set "
5. Touch the timer sensor (13) once again.
The display stops flashing.
The time display counts down by the min-
ute.
An alarm will go off after the countdown
expires.
Changing the alarm time
1. Touch the timer sensor (13).
The remaining minute number will flash
for a few seconds in addition to the timer
sensor.
2. Set the new alarm time, as described
in section "Setting the alarm time" on
page EN-18.
Stopping the countdown
1. Touch the timer sensor (13).
The remaining minute number will flash
for a few seconds in addition to the timer
sensor.
2. Change the alarm time to "
scribed in section"Setting the alarm time"
on page EN-18.
The display changes to "
The countdown is interrupted.

Use as a cooking time limit

To use the timer as a cooking time limit,
the appliance must be switched on and
the selected cooking zone(s)/area(s) must be
in operation.
Setting the cooking time limit
- -
".
5
1. Tap the display for the cooking zone/area
for which you would like to use the cook-
ing time limit.
".
3
The display begins to flash.
00
(13)
2. Touch the timer sensor (13).
The "
0
flash.
3. Set the time, as described in section "Set-
ting the alarm time" on page EN-18.
", as de-
00
".
-. -
-
4
- -
-
4
- -
(12)
" on the units position will begin to