EINHELL TC-TS 2000 U Originalbetriebsanleitung Seite 87

The product is intended solely for use at connection points that
•
a) do not exceed a maximum permitted supply impedance Zsys
= 0.25 + j0.25, or
b) have a continuous current-carrying capacity of the mains of at
least 100 A per phase.
As the user, you are required to ensure, in consultation with your
•
electric power company if necessary, that the connection point
at which you wish to operate the product meets one of the two
requirements, a) or b), named above.
Anl_TC_TS_2000_U_SPK9.indb 87 Anl_TC_TS_2000_U_SPK9.indb 87
GB
- 87 -
28.04.2020 14:40:10 28.04.2020 14:40:10