EINHELL TC-TS 2000 U Originalbetriebsanleitung Seite 71

K uncertainty .................................................................... 3 dB(A)
WA
Wear ear-muff s.
The impact of noise can cause damage to hearing.
The stated noise emission values were measured in accordance
with a set of standardized criteria and can be used to compare one
power tool with another.
The stated noise emission values can also be used to make an initi-
al assessment of exposure.
Warning:
The noise emission levels may vary from the level specifi ed during
actual use, depending on the way in which the power tool is used,
especially the type of workpiece it is used for.
Keep the noise emissions and vibrations to a minimum.
Only use appliances which are in perfect working order.
•
Service and clean the appliance regularly.
•
Adapt your working style to suit the appliance.
•
Do not overload the appliance.
•
Have the appliance serviced whenever necessary.
•
Switch the appliance off when it is not in use.
•
Limit the operating time!
All stages of the operating cycle must be considered (for example,
times in which the electric tools are switched off and times in which
the tool is switched on but operates without load).
Caution!
Residual risks
Even if you use this electric power tool in accordance with in-
structions, certain residual risks cannot be rules out. The fol-
lowing hazards may arise in connection with the equipment's
Anl_TC_TS_2000_U_SPK9.indb 71 Anl_TC_TS_2000_U_SPK9.indb 71
GB
- 71 -
28.04.2020 14:40:09 28.04.2020 14:40:09