EINHELL TC-TS 2000 U Originalbetriebsanleitung Seite 53

Danger!
When using the equipment, a few safety precautions must be ob-
served to avoid injuries and damage. Please read the complete
operating instructions and safety regulations with due care. Keep
this manual in a safe place, so that the information is available at all
times. If you give the equipment to any other person, hand over the-
se operating instructions and safety regulations as well. We cannot
accept any liability for damage or accidents which arise due to a
failure to follow these instructions and the safety instructions.
1. Safety regulations
General safety information for power tools
Warning!
Read all the safety information, instructions, illustrations and
technical data provided on or with this power tool. Failure to
adhere to the following instructions may result in electric shock, fi re
and/or serious injury.
Keep all the safety information and instructions in a safe
place for future use.
The term „power tool" used in the safety information and instruc-
tions refers to power tools operated from the mains power supply
(with a power cable) and to battery operated power tools (without a
power cable).
1. Workplace safety
a) Keep your work area clean and well lit. Untidy or unlit work
areas can result in accidents.
b) Do not use this power tool in an area where there is a risk
of explosion and where there are infl ammable liquids, ga-
ses or dust. Power tools generate sparks that can ignite dust or
vapors.
Anl_TC_TS_2000_U_SPK9.indb 53 Anl_TC_TS_2000_U_SPK9.indb 53
GB
- 53 -
28.04.2020 14:40:08 28.04.2020 14:40:08